HP Technical
White Paper
HP CM8060/CM8050 Color MFP – Book Copy Feature
December 2, 2009
Document Summary
This document describes how to use the Book Copy feature for Edgeline MFP devices.
Security:
Public
Document Number:
c01955359
Applicable products............................................................................................................................. 7
4. Choose an option for copying book covers, and then touch the Next button.
a. Select Copy front cover to copy only the front book cover.
b. Select Copy front and back covers to copy both the front and back book
covers.
c. Select Don’t copy book covers if you do not want to copy the book covers.
5. Choose an option for the book binding, and then touch the Finish button.
a. Select Book has left binding for books with binding on the left.
b. Select Book has right binding for books with binding on the right.
6. Adjust other copy settings as necessary and select the number of copies to make.
7. Touch the Start button to start the Book Copy job
8. If you chose the Copy front and back covers or Copy front cover option, place the
closed book with the front cover face down on the glass, positioning the book in the upper-left
corner with the top edge toward the rear of the glass. Touch the Scan button.
9. If you chose the Copy front and back covers option, place the closed book with the
back cover face down on the glass, positioning the book in the upper-left corner with the top
edge toward the rear of the glass. Touch the Scan button.
10. Place the open book face down on the glass with the top edge toward the rear of the glass.
Align the book spine with the book symbol along the top edge of the glass.
11. Select which pages of the book should be copied:
a. Copy both pages copies the images on both the left and right side of the spine.
b. Skip left page copies the image on the right side of the spine only.
c. Skip right page copies the image on the left side of the spine only.
12. When each page is ready to be scanned, touch the Scan button.
13. After the last page is scanned, touch the Finish button.
14. When prompted, touch the Yes button to begin printing.
Frequently Asked Questions
1. Why must the flatbed cover be open while scanning a book?
The flatbed cover must be open so that the device can most accurately detect the size of the
book being copied. After detecting the size of the book, the device will crop the scanned
image removing background content and only printed the book image on the page.
2. Why does the device scan twice?
The first scan during a Book Copy is to detect the size/shape of the book and only requires
scanning half of the book. During the second scan, the entire book is scanned in order to
capture the image data for copying.
3. What will be the order of book covers and book pages in printed output?
If front and/or back covers have been selected for the Book Copy job, those covers will be
scanned prior to scanning any of the internal book pages. When the Book Copy job is
printed, the output will include the front cover first, and then all of the book pages, followed
by the back cover.
For more information
Applicable products
Product Models
HP CM8060/CM8050 Color MFP
© 2009 Hewlett-Packard Development Company, L.P. The information contained
herein is subject to change without notice. The only warranties for HP products and
Product Numbers
C5957A, C5958A
services are set forth in the express warranty statements accompanying such
products and services. Nothing herein should be construed as constituting an
additional warranty. HP shall not be liable for technical or editorial errors or
omissions contained herein.
4AA0-XXXXENW, Dec 2009
|