Kramer Electronics TV Cables VA 4H User Manual

KRAMER ELECTRONICS LTD.  
USER MANUAL  
MODEL:  
VA-4H  
4-Channel HDMI EDID  
Controller  
P/N: 2900-300043 Rev 2  
 
1
Introduction  
Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been  
providing a world of unique, creative, and affordable solutions to the vast range of  
problems that confront the video, audio, presentation, and broadcasting  
professional on a daily basis. In recent years, we have redesigned and upgraded  
most of our line, making the best even better!  
Our 1,000-plus different models now appear in 11 groups that are clearly defined  
by function: GROUP 1: Distribution Amplifiers; GROUP 2: Switchers and Routers;  
GROUP 3: Control Systems; GROUP 4: Format/Standards Converters; GROUP 5:  
Range Extenders and Repeaters; GROUP 6: Specialty AV Products; GROUP 7:  
Scan Converters and Scalers; GROUP 8: Cables and Connectors; GROUP 9:  
Room Connectivity; GROUP 10: Accessories and Rack Adapters and GROUP 11:  
Sierra Products.  
Congratulations on purchasing your Kramer VA-4H 4-Channel HDMI EDID  
Controller, which is ideal for the following typical applications:  
Distributing presentation graphics  
Using a display at a distance from the computer  
Using in graphics production studios  
VA-4H - Introduction  
1
 
 
2
Getting Started  
We recommend that you:  
Unpack the equipment carefully and save the original box and packaging  
materials for possible future shipment  
Review the contents of this user manual  
Go to http://www.kramerelectronics.com to check for up-to-date  
user manuals, application programs, and to check if firmware  
upgrades are available (where appropriate).  
i
2.1  
Achieving the Best Performance  
To achieve the best performance:  
Use only good quality connection cables (we recommend Kramer high-  
performance, high-resolution cables) to avoid interference, deterioration in  
signal quality due to poor matching, and elevated noise levels (often  
associated with low quality cables)  
Do not secure the cables in tight bundles or roll the slack into tight coils  
Avoid interference from neighboring electrical appliances that may adversely  
influence signal quality  
Position your Kramer VA-4H and away from moisture, excessive sunlight  
and dust  
This equipment is to be used only inside a building. It may only be  
connected to other equipment that is installed inside a building.  
!
2.2  
Safety Instructions  
Caution:  
There are no operator serviceable parts inside the unit  
!
Warning: Use only the Kramer Electronics input power wall  
adapter that is provided with the unit  
Warning: Disconnect the power and unplug the unit from the wall  
before installing  
2
VA-4H - Getting Started  
 
     
2.3  
Recycling Kramer Products  
The Waste Electrical and Electronic Equipment (WEEE) Directive 2002/96/EC  
aims to reduce the amount of WEEE sent for disposal to landfill or incineration by  
requiring it to be collected and recycled. To comply with the WEEE Directive,  
Kramer Electronics has made arrangements with the European Advanced  
Recycling Network (EARN) and will cover any costs of treatment, recycling and  
recovery of waste Kramer Electronics branded equipment on arrival at the EARN  
facility. For details of Kramer’s recycling arrangements in your particular country  
VA-4H - Getting Started  
3
 
 
3
Overview  
The VA-4H is an EDID controller for HDMI signals. The unit inputs up to four HDMI  
channels and lets you select an EDID for each channel from the display, an  
internal default EDID or to pass the signal through without change.  
The VA-4H features:  
A maximum data rate of 2.25Gbps per channel for a total of 6.75Gbps  
A maximum input resolution of 1080p  
HDTV compatibility  
Compliance with standards: HDMI and HDCP 1.2  
Support of HDMI (V.1.4 with Deep Color, x.v.Color™, Lip Sync, HDMI  
Uncompressed Audio Channels, Dolby TrueHD, DTS-HD, CEC)  
Four input/output channels  
Four tamper-proof, recessed selector pushbuttons  
Non-volatile memory that saves final settings  
LED indicators for power and EDID source settings  
An RS-232 port for upgrading firmware  
A 5V DC power source  
A compact MultiTools enclosure that can be rack mounted with an optional  
RK-13 rack adapter  
4
VA-4H - Overview  
 
 
4
Defining the VA-4H 4-Channel HDMI EDID  
Controller  
This section defines the VA-4H.  
Figure 1: VA-4H 4-Channel HDMI EDID Controller Front Panel  
#
1
2
3
Feature  
Function  
ON LED  
Illuminates green when 5V DC power is connected  
Press to choose the channel 1 EDID source  
CAPTURE Button  
DEFAULT  
PASS  
MONITOR LEDS  
Upper LED illuminates red when default EDID is chosen,  
both LEDS illuminate when pass-through is chosen, lower  
green LED illuminates when the monitor EDID is chosen  
4
5
CAPTURE Button  
Press to choose the channel 2 EDID source  
DEFAULT  
PASS  
MONITOR LEDS  
Upper LED illuminates red when default EDID is chosen,  
both LEDS illuminate when pass-through is chosen, lower  
green LED illuminates when the monitor EDID is chosen  
6
7
CAPTURE Button  
Press to choose the channel 3 EDID source  
DEFAULT  
PASS  
MONITOR LEDS  
Upper LED illuminates red when default EDID is chosen,  
both LEDS illuminate when pass-through is chosen, lower  
green LED illuminates when the monitor EDID is chosen  
8
9
CAPTURE Button  
Press to choose the channel 4 EDID source  
DEFAULT  
PASS  
MONITOR LEDS  
Upper LED illuminates red when default EDID is chosen,  
both LEDS illuminate when pass-through is chosen, lower  
green LED illuminates when the monitor EDID is chosen  
VA-4H - Defining the VA-4H 4-Channel HDMI EDID Controller  
5
 
   
Figure 2: VA-4H 4-Channel HDMI EDID Controller Rear Panel  
#
Feature  
IN HDMI  
Function  
10  
Connects to the channel 1 HDMI source  
Connector  
11  
12  
13  
14  
15  
16  
17  
OUT HDMI  
Connector  
Connects to the channel 1 HDMI acceptor  
Connects to the channel 2 HDMI source  
Connects to the channel 2 HDMI acceptor  
Connects to the channel 3 HDMI source  
Connects to the channel 3 HDMI acceptor  
Connects to the channel 4 HDMI source  
Connects to the channel 4 HDMI acceptor  
IN HDMI  
Connector  
OUT HDMI  
Connector  
IN HDMI  
Connector  
OUT HDMI  
Connector  
IN HDMI  
Connector  
OUT HDMI  
Connector  
18 PROGRAM RS-232  
Connects to a PC for upgrading the device firmware (see  
Upgrading the VA-4H Firmware document on the Kramer  
Web site)  
Connector  
19 5V DC Connector  
Connects to the 5V DC power supply  
6
VA-4H - Defining the VA-4H 4-Channel HDMI EDID Controller  
 
 
5
Connecting the VA-4H  
Always switch off the power to each device before connecting it to your  
VA-4H. After connecting your VA-4H, connect its power and then  
i
switch on the power to each device.  
To connect the VA-4H as illustrated in the example in Figure 3:  
1. Connect up to four HDMI sources (as an example, DVD players) to the  
HDMI IN connectors.  
2. Connect the HDMI OUT connectors to up to four HDMI acceptors (as an  
example, displays with speakers).  
Figure 3: Connecting the VA-4H 4-Channel HDMI EDID Controller  
VA-4H - Connecting the VA-4H  
7
 
   
6
Operating the VA-4H  
To set the EDID source for each channel as illustrated in the example in Figure 3:  
1. Press and hold the CAPTURE pushbutton. The indicator LEDS illuminate in  
a cycle as follows:  
MONITOR, lower green LED  
DEFAULT, upper red LED  
PASS, both LEDS together.  
2. Release the pushbutton at the desired setting.  
The setting is saved in non-volatile memory.  
Notes:  
DEFAULT and MONITOR settings do not support HDCP key exchange.  
For the display to work properly with HDCP encryption, the VA-4H must be  
set to PASS  
If an EDID is captured the MONITOR LED flashes slowly  
If an EDID is not captured, the DEFAULT LED flashes quickly and the  
default EDID is loaded  
When exchanging a display, refresh the source by disconnecting and  
reconnecting the HDMI cable between the source and the device input  
8
VA-4H - Operating the VA-4H  
 
 
7
Technical Specifications  
INPUTS:  
4 HDMI connectors  
4 HDMI connectors  
2.25Gbps per data channel  
HDMI, HDCP 1.2  
OUTPUTS:  
MAX. DATA RATE  
COMPLIANCE WITH HDMI  
STANDARDS:  
RESOLUTION:  
POWER SOURCE:  
CONTROLS:  
1080p @60Hz  
5V DC, 50mA  
4 source selector pushbuttons, RS-232 port for firmware  
upgrade  
INDICATORS:  
Power and EDID source LEDs  
0° to +40°C (32° to 104°F)  
–40° to +70°C (–40° to 158°F)  
10% to 90%, RHL non-condensing  
14.3cm x 12.2cm x 4.4cm (5.6” x 4.8” x 1.7”)  
0.42kg (0.92lb)  
OPERATING TEMPERATURE:  
STORAGE TEMPERATURE:  
HUMIDITY:  
DIMENSIONS:  
WEIGHT:  
ACCESSORIES:  
OPTIONS:  
Power supply  
RK-13 19” rack adapter  
Specifications are subject to change without notice at http://www.kramerelectronics.com  
VA-4H - Technical Specifications  
9
 
 
 
2º‡ÍÏ•âÍØ]Ïâ„ÏÍ®∏ñº‡≥]Ï®º∏ͺͺı‡ÍÀ‡ºÄıuÏ„Í]∏ÄÍ]ÍØ®„ÏͺñÍ;‡]≥â‡ÍÄ®„χ®kıϺ‡„|Í  
˚®„®Ïͺı‡ÍV âkÍ„®Ïâ͸•â‡âÍıÀÄ]Ïâ„ÍϺÍÏ•®„Íı„â‡Í≥]∏ı]ØÍ≥]˛ÍkâÍñºı∏Ä–Í  
V â͸âØuº≥âͲºı‡Í’ıâ„Ï®º∏„|Íuº≥≥â∏Ï„|Í]∏ÄÍñââÄk]uÆ–Í  
L 2,NXÍV K?5?3  
+®„uº∏∏âuÏÍÏ•âÍı∏®ÏÍñ‡º≥ÍÏ•âÍÀº¸â‡  
!
„ıÀÀØ˛Íkâñº‡âͺÀâ∏®∏ùÍ]∏ÄÍ„â‡˚®u®∏ù  
2900-300043  
2
P/N:  
Rev:  
 

Ingersoll Rand Home Theater Server 613201 2 C User Manual
Jenn Air Cooktop JED8130ADB User Manual
JVC Computer Monitor KW AVX700 User Manual
JVC DVD Player KD DV7301 User Manual
Kenmore Water System 62538815 User Manual
Kenwood Car Speaker KFC 1661 User Manual
KitchenAid Beverage Dispenser KUWS246EBL02 User Manual
KitchenAid Garbage Disposal KCDS100T User Manual
KitchenAid Refrigerator KBFA20ERSS01 User Manual
Kodak All in One Printer ESP 3200 Series User Manual